Fouten Fouten Fouten
15961836110
Worm gear hard seal lug butterfly valve

Worm gear hard seal lug butterfly valve

Product Features
无
Model number
无
Specification and caliber
无
Pressure level
Material
Product Introduction

The worm-gear-operated lug butterfly valve rotates a metal-seated disc to open or close the pipeline. The offset sealing arrangement controls how the disc approaches the seat. Near the closed position, the gearbox supplies the torque needed to establish sealing contact; the operating load depends on differential pressure and the selected sealing pair.

Metal seat and sealing-ring materials are selected for the fluid, operating temperature and wear conditions. The body carries pressure and piping loads, while the disc edge, seat, shaft seals and packing face different contact conditions. Comparing these components separately helps identify where corrosion, erosion or elevated temperature affects the selection.

For replacement, compare flange drilling, facing and installed length, then leave room for the disc to complete its travel. Lug bolts must match the body threads and the assembled flange thickness. End-of-line service requires a body and seat-retention arrangement rated for that duty, including the actual pressure direction.

Select the gearbox using the valve load through the full operating stroke, including seating and unseating. Increasing handwheel effort to overcome abnormal resistance can damage the drive or sealing parts. Before inspection, isolate and depressurize the line and prevent unintended movement; then check for obstruction, alignment and seat damage.

FOUTEN

Discuss your valve configuration and quotation

Provide a phone number or work email; at least one is required.

Additional service and connection details (optional)

Please send drawings to the official email shown on this page. This form does not accept attachments.

Home Home Valve selectionValve selection news informationnews information Contact usContact us