Valve selection
Stainless steel lug butterfly valve with handle - PTFE seat
This stainless steel lug-style butterfly valve fits between pipe flanges. To select a configuration, check the body, disc and seat materials separately from the method of operation.
Check the drive and fit
- Confirm whether your installation requires a hand lever or a worm-gear operator. Check the drive on the proposed assembly against the drawing and model designation.
- Provide the pipe size and mating flange standard so the bolting and installation dimensions can be checked.
What to include in an enquiry
- Provide the fluid, operating temperature and pressure. Confirm the required body, disc and seat materials for that service.
- If space is limited or the valve is needed for end-of-line service, specify that requirement before ordering.



Can any cleaning chemical be used with stainless steel?
No. Grade, chemical concentration, temperature and contact time affect corrosion. The seat, stem and seals must also tolerate the cleaning cycle, even when the body remains compatible.
Does a PTFE seat remove all elastomer limits?
Not necessarily. Other seals or backing components may still contain elastomers. The allowable service conditions belong to the complete assembly, not just the named seat material.
Can any bolt length be used in the lug holes?
No. Where holes are blind, a bolt can bottom out before clamping the joint; excessive projection can also interfere with the body. Bolt length and engagement must suit the actual valve and flange assembly.

news information