Q941F46/PFA electric cast steel fluoropolymer-lined flange ball valve (PFA/FEP optional)

Q941F46/PFA electric fluoropolymer-lined flange ball valve

This product adopts an electric actuator, flange connection, and lined ball valve structure. The current page has a diameter of DN25-DN800 and a pressure of PN16/Class150. The valve body field is WCB or 304 (CF8), and the lining field is listed as PFA and FEP.

The lining is based on the current parameter fields

The parameters on this page are currently listed as PFA and FEP, so the main text will not be expanded to PTFE, PO, or other linings. The actual materials need to be confirmed based on the medium, temperature, pressure, and technical conditions of the order.

Electric actuator configuration

The working power supply, output torque, switch or adjustment form, control signal, and valve position feedback of the actuator should be selected according to the project control system. AC220V, AC380V, DC24V, 4–20mA, or 0–10V cannot be used as the default configuration for all products.

The flange standard cannot be expanded on its own

The current pressure field is PN16/Class150. This page will no longer expand configurations such as PN25 and Class300 that are not listed. The actual flange size and pressure temperature rating should be confirmed according to specific standards.

More electric ball valves are availableSelection of electric ball valveFor lining products, please refer toLining valve selection。

Frequently Asked Questions

Is this electric ball valve 220V by default?

Not default, the power supply should be determined based on the actual executing mechanism and project power supply conditions.

Does it support 4–20mA adjustment by default?

Not default, only established when configuring the corresponding regulating actuator or control module.

Can Q941F46/PFA replace the valve on the Class300 pipeline directly?

The specific specifications of this product, including pressure rating, flange standards, temperature and pressure ratings, and lining requirements, should be checked first. Cannot expand existing configurations to Class300 without confirmation; It cannot be directly replaced until the connection and pressure conditions are consistent.