Valve selection
Q347F Worm-Gear Fully Welded Ball Valve for Gas Venting
This worm-gear ball valve controls a gas vent or blowdown branch. Opening the valve allows gas to pass to the branch’s designed discharge or recovery system; closing it isolates that route. The valve does not automatically open at a set pressure and does not replace independently designed overpressure protection.
A fully welded body describes the body-joint construction. The pipe-end connections are a separate feature. When fitting an existing branch, match the actual end type, connection dimensions and pressure-temperature rating instead of assuming that every fully welded body has welded pipe ends.
The worm gear provides local manual operation. For a natural-gas or liquefied-petroleum-gas (LPG) branch, material and seal selection follow the actual gas composition, temperature and operating pressure. LPG and LNG name different media and are not interchangeable abbreviations.
The branch’s downstream conditions matter as much as the valve opening. A long recovery line, another connected discharge source or a higher receiving pressure can reduce the available pressure difference. Required venting flow must therefore be checked for the complete route. The valve’s full-open bore alone does not establish the capacity of the discharge system.
Leave room for the handwheel, gear housing and maintenance access, with the pipework properly supported. If the process requires remote or emergency actuation, select a suitable actuator and control arrangement for that task. Manual worm-gear operation is not an automatic pressure-sensing function.
Frequently asked questions
Does a fully welded body determine the pipe ends?
No. A body joint and a pipe connection are different features. Match the supplied valve’s actual ends to the branch; do not specify the installation welding method from the body description alone.
Can the worm gear open the valve at a set pressure?
No. It is a manual operating mechanism. A pressure-triggered protection duty requires a separately designed sensing, actuation or relief arrangement with the necessary capacity.
Will the full-open bore determine venting flow?
Not alone. The available inlet pressure, receiving pressure, connecting pipe losses and downstream equipment also affect flow. A restrictive discharge line can limit the branch even with the ball fully open.

news information