Fouten Fouten Fouten
15961836110
A105 forged-steel trunnion ball valve with worm gearbox

A105 forged-steel trunnion ball valve with worm gearbox

Product Features
Forged
Model number
Q341PEEK
Specification and caliber
DN50-DN1000
Pressure level
PN16-PN64,Class150-Class900
Material
A105/F304/F316
Product Introduction

Supported ball and manual gearbox

This forged-steel pipeline ball valve uses a supported ball and a worm gearbox for manual operation. The ball turns with the stem to open or close the passage. Its supports limit movement caused by the fluid load; a fixed or trunnion-mounted ball is not a ball that remains stationary during operation.

The seat arrangement establishes sealing against the rotating ball. Differential pressure and seat friction still affect operating torque, so the gearbox must be matched to the actual valve load. Support of the ball does not make the required handwheel effort the same for every service condition.

A105 body material

A105 identifies a carbon-steel forging material used for pressure-containing components. The forging material and its heat treatment are part of the body specification; they do not by themselves establish the complete valve pressure–temperature rating or resistance to a corrosive fluid.

Separate the body, ball, stem, seat, packing and gasket materials when comparing configurations. The body material is not the seat material. Process composition, temperature, differential pressure and the required shutoff performance determine whether the chosen combination suits the duty.

Gearbox and operating load

Size the gearbox from the required valve torque through the stroke, including the initial movement after an idle period. Differential pressure, temperature, deposits and seat condition can change that load. Check the gearbox output and the operating effort at the handwheel together.

An unusually heavy handwheel is a reason to investigate the process load, mechanical condition and operating procedure. Extending the handwheel or forcing the mechanism can overload the drive or valve components. Inspection or internal work requires process isolation, depressurization and control of any stored energy.

Piping and replacement checks

Compare the actual end connection, pressure designation, face-to-face length and installation space with the pipeline drawing. A similar nominal size or material name does not establish that an existing valve can be replaced without dimensional checks.

Keep the valve identification and component-material record with the maintenance documentation. Replacement seats and seals must match the relevant dimensions, closing load and process conditions, rather than being selected by polymer or alloy name alone.

Frequently asked questions

Does the fixed ball stay still?

No. The ball turns with the stem to open and close the passage. Fixed or trunnion-mounted describes how the ball is supported against process loads, rather than preventing its operating rotation.

Does A105 suit corrosive fluids?

A105 is a carbon-steel forging grade. Its suitability depends on the fluid composition, temperature and corrosion requirements, together with all other wetted materials. A forging grade alone does not establish corrosion resistance for a particular process.

How is the gearbox sized?

Compare the required valve torque through the stroke with the gearbox output and allowable handwheel effort. Include differential pressure, seat friction, temperature and the first movement after idle periods. Nominal diameter alone is not enough.

FOUTEN

Discuss your valve configuration and quotation

Provide a phone number or work email; at least one is required.

Additional service and connection details (optional)

Please send drawings to the official email shown on this page. This form does not accept attachments.

Home Home Valve selectionValve selection news informationnews information Contact usContact us