Pneumatic switch type welded ball valve three piece 1000WOG

Q961F Pneumatic Three piece Welded Ball Valve

The current page of Q961F is a pneumatic three piece welded ball valve, which adopts welded end connection, with a diameter of DN10-DN100, pressure identification of 1000WOG/2000WOG, and materials of 304 (CF8) and 316L (CF8M).

Three piece welded structure

The three piece valve body is easy to maintain according to the actual structure, but the specific welding end form, disassembly method, and valve seat protection measures should be confirmed based on product drawings and on-site welding processes.

1000WOG and 2000WOG

The pressure label cannot be interpreted uniformly without considering the material, temperature, valve seat, and design standards. The specific allowable working pressure should be based on the actual rated data of the product.

Pneumatic drive

The executing agency can choose single acting or double acting according to the project, and be equipped with accessories such as solenoid valves, filtering and pressure reducing devices, and limit feedback. If continuous adjustment is required, it is also necessary to confirm whether the valve body is suitable for throttling and locator configuration.

For more pneumatic products, please refer toSelection of Pneumatic Ball Valve。

Frequently Asked Questions

Is Q961F a threaded ball valve?

The current product identity and parameters on this page are clearly three piece welded ball valves, and should not be mixed with the thread identity of HOLD previously.

Is 1000WOG always equal to the working pressure of 1000PSI?

It cannot be used directly without considering the material, temperature, and product design. The actual rated data should prevail.

Is the pneumatic three piece ball valve suitable for proportional adjustment by default?

Not default, both the valve body and control configuration need to meet the requirements of regulating working conditions.