Fouten Fouten Fouten
15961836110
Pneumatic cast steel WCB fluoropolymer lined flange ball valve

Pneumatic cast steel WCB fluoropolymer lined flange ball valve

Product Features
Pneumatic fluorine lining
Model number
Q641F46/PFA
Specification and caliber
DN40-DN600
Pressure level
PN16/CLASS 150/10K
Material
WCB cast steel/304 stainless steel& PFA/PTFE/FEP
Product Introduction

Q641F46/PFA Pneumatic fluoropolymer-lined Flange Ball Valve

This product adopts pneumatic drive and flange connection. The available configurations include WCB, 304 valve body materials, as well as lining options such as PFA, PTFE, FEP, etc. The specific model suffix and actual lining material must be based on the order and product information.

Lining materials cannot be mixed into one type

PFA, FEP and PTFE are distinct fluoropolymers with different processing and service characteristics. F46 denotes FEP; the selected lining should match the medium and operating conditions.

How to choose a fluoropolymer-lined ball valve?

It is necessary to provide the composition and concentration of the medium, temperature, pressure, diameter, and connection standards, and confirm the combination of valve body, sphere, valve seat, and lining materials. The risk of lining damage should also be evaluated separately for particle and abrasion conditions.

How to configure pneumatic accessories?

Single acting or double acting actuators, solenoid valves, filtering and pressure reducing devices, limit feedback or locators can be configured according to control needs. The proportional adjustment function is only established when the actual valve structure and positioning control configuration meet the requirements.

Fluorine lining materials can be referred toPFA, FEP, and PTFE lining material selection instructionsSee more pneumatic ball valvesSelection of Pneumatic Ball Valve。

Frequently Asked Questions

Are all products of Q641F46/PFA lined with PTFE?

No. The lining material is selected from the available options and specified for the supplied valve.

Can PFA, FEP, and PTFE be replaced freely?

No, it should be selected based on the medium, temperature, pressure, and actual manufacturing structure.

Does the pneumatic fluoropolymer-lined ball valve support 4–20mA by default?

Not default, actual configuration of locator and corresponding control module is required.

Online message

Provide a phone number or work email; at least one is required.

Please send drawings to the official email shown on this page. This form does not accept attachments.

Home Home Valve selectionValve selection news informationnews information Contact usContact us