Fouten Fouten Fouten
15961836110
Worm gear LUG convex ear steel lined fluoropolymer butterfly valve

Worm gear LUG convex ear steel lined fluoropolymer butterfly valve

Product Features
Steel lined fluoropolymer, lug type
Model number
LTD371F46
Specification and caliber
DN50-DN500
Pressure level
PN16
Material
QT450/WCB/304/316L, Lining PFA/FEP/PTFE
Product Introduction

LTD371F46 Worm Wheel Lug fluoropolymer-lined Butterfly Valve

The LTD371F46 adopts a protruding ear valve body, worm gear transmission, and lined butterfly valve structure. The current diameter is DN50-DN500, and the pressure is PN16. The valve body can be selected from QT450, WCB, 304, or 316L, and the lining is configured according to PFA, FEP, or PTFE.

What is the difference between the protruding ear style and the regular clip on style?

The convex ear valve body is equipped with threaded convex ears along the outer edge, which can be connected to the flanges on both sides respectively; The ordinary wafer-type usually relies on through bolts to clamp the valve body between the flanges on both sides. Whether single-sided pipe dismantling and pressure bearing are actually allowed must be based on the product design requirements.

How to choose the lining?

PFA, FEP, and PTFE need to be selected based on the medium, temperature, pressure, and product manufacturing structure, and should not be interchanged solely based on the name "fluorine lining".

Selection of worm gear transmission

The worm gear mechanism should be configured according to the actual torque of the valve, and the rated output torque of the operating mechanism should be checked for larger diameters or higher pressure differentials.

Special topic on protruding ear structures can be found inSelection of convex ear butterfly valveSee lining material for detailsLining valve selection。

Frequently Asked Questions

Is it rated for end-of-line service?

That depends on the lug strength, seat support and specified valve rating for that duty. A lug body does not establish the rating by itself; removing pipework still requires isolation, depressurization and the prescribed maintenance precautions.

Can PFA, FEP, and PTFE be directly interchangeable?

No, the selection should be based on the actual medium and temperature.

Does pipe vibration make a lug body necessary?

Not by itself. Pipe vibration and sustained loads require attention to supports, alignment and the connected equipment. Lug or wafer construction is chosen for the flange arrangement and maintenance duty; a lug body alone does not correct a vibrating pipe system.

FOUTEN

Discuss your valve configuration and quotation

Provide a phone number or work email; at least one is required.

Additional service and connection details (optional)

Please send drawings to the official email shown on this page. This form does not accept attachments.

Home Home Valve selectionValve selection news informationnews information Contact usContact us