3PC Electric Threaded Ball Valve 1000WOG& 2000WOG

Q911F Three piece Electric Threaded Ball Valve

This product adopts an electric actuator, threaded connection, and three piece ball valve structure. The current page model is Q911F, with a diameter of DN15-DN100, pressure markings including 1000WOG and 2000WOG, and material fields including WCB, CF8, and CF8M. The specific material combination and supply scope shall be subject to the product information and order.

How to understand 1000WOG and 2000WOG?

1000WOG and 2000WOG belong to the pressure rating identification on the current product page, but cannot be directly converted into a unified allowable working pressure without considering the material, design temperature, valve seat, and product standards. This page no longer uses "1000WOG fixed 4MPa, 2000WOG fixed 8MPa" as the unified conclusion for all configurations.

What needs to be confirmed for threaded connections?

When selecting, it is necessary to clarify the thread system, size, and matching pipe requirements. For example, when using NPT, G, or other threads, they should be confirmed according to the product and project documents, and cannot be directly interchanged after only writing "threaded ball valve".

How to choose an electric actuator?

The actuator needs to be selected based on valve opening and closing torque, power supply, switch or adjustment requirements, valve position feedback, and on-site environment. 4–20mA、 Communication interfaces, explosion-proof or diving configurations are not default features of all products.

More electric products can be found atSelection of electric ball valveSee other ball valve structures for detailsBall valve manufacturer column。

Frequently Asked Questions

Is 1000WOG fixed to a certain MPa value?

It is not recommended to directly fix the conversion. The actual allowable pressure needs to be confirmed based on the material, temperature, sealing, and specific product standards.

Does Q911F support 4–20mA by default?

Not default, only established when configuring the corresponding regulating actuator or control module.

Is a three piece ball valve suitable for continuous adjustment?

It cannot be judged solely based on the three piece structure. Ordinary ball cores are mainly used for opening, closing, and cutting. If continuous adjustment is required, the flow channel, valve seat, and operating conditions should be confirmed separately.